2F
1. Robot arm use vacuum stacker for stacking strips removal. The computer scan the QR code on
timber pack and confirm if the size of timber is correct. The vacuum stacker can also stack the timber
with coarse surface and it is dirt resistant.
2. Ergonomic working platform for operator to mark line on timber and feed into optimizing cut off
saw.
3. Optimizing cut off saw cut the timber to the specified length and classify the timber.
4. Auto paddling system between optimizing cut off saw and finger jointer, distributes the wood
pieces with sensor recognition depend on customized size range.
5. Continuous compound finger jointing machine for length 3M x width 250mm x thickness 50mm
and outfeed length 12M materials. It can be installed color spray printer for identify the timber.
6. Curing storage (2 layers) with lug chains
7. 100m per minute high speed moulder
8. Paternoster feed the timber to 1st floor working station.

1F
9. Automatic rotary press for max. 12M long x 1200mm wide x 250mm height of wooden beam.
10. Double surface planer for max 650mm wide x 260mm height materials.
11. Beam planer for max 610mm wide x 260mm height wooden post or beam.
12. Beam saw for cutting 12M long beam into customized length. Cutting width x height
600x250mm

Facts
1. Factory Size: Length x Width 60M x 40M = 2400m2 (2 floors)
2. Infeed size: Up to 6M long x 250mm width x 50mm thickness
3. Up to 12 m x 600 mm x 250 mm beams size
4. Up to 12 m³/shift 8 hours for glulam beams
5. Plant layout can be customized according to factory size.